English
English
Case Study

Railway Additive Manufacturing: How Siemens Mobility 3D Prints End-Use Parts

Siemens Mobility leverages the Stratasys F900® and Fortus FDC™ to improve machine utilization, enhance part quality, and accelerate delivery of large-format rolling stock components.


Siemens mobility rail center with train

3D Printing End-Use Parts for Transportation Applications

Additive manufacturing (AM) applications allow transportation OEMs to address new market demands for customization and advanced materials for end-use parts.

Additive manufacturing is helping railway manufacturers produce end-use components and replacement parts with greater production flexibility. Siemens Mobility uses Stratasys industrial 3D printing technology to manufacture parts for rolling stock, including large-format applications. By combining the Stratasys F900® with the Fortus FDC™, Siemens Mobility improved machine utilization, production reliability and part quality while supporting faster spare-part delivery.

How Siemens Mobility Uses Additive Manufacturing for Rail Parts

Siemens Mobility, a Siemens AG subsidiary headquartered in Munich, specializes in rail transportation, spanning rolling stock, electrification, mobility management, and customer services. Its portfolio includes metro, tram, light rail, commuter, intercity, and high-speed trains, along with locomotives and automated people movers.

Recognizing additive manufacturing’s potential in 2014, the company has since integrated 3D printing across its portfolio. Through its Easy Sparovation Part® offering, Siemens Mobility delivers optimized spare parts with enhanced functionality and fewer components.

By collaborating with rail operators and applying proven design principles, the team rapidly produces complex geometries, from low-volume replacements to series runs of several thousand parts.

The Challenge of Large-Format Railway 3D Printing

As Siemens Mobility expanded its use of additive manufacturing for railway parts, the team needed to increase the reliability and efficiency of long, large-format builds on the Stratasys F900®.

Material condition was an important part of that challenge. For extended print jobs, maintaining filament in the proper condition helps support consistent production and reduces the risk of moisture-related printing issues.

Siemens Mobility needed a solution that could support longer, more reliable production runs while reducing operator intervention and helping maintain consistent part quality.

Siemens engineer using a Stratsys F900 FDM 3D Printer
© Siemens Mobility GmbH

Why ULTEM™ 9085 Resin for Railway 3D Printing?

For railway applications, material performance is critical. Siemens Mobility uses ULTEM™ 9085 Resin for 3D printed parts subject to strict fire, smoke and toxicity requirements.

Maintaining the material in the proper condition is also important for consistent print quality. Moisture absorbed by filament can contribute to printing defects, creating challenges during long, large-format builds.

To address this, Siemens Mobility paired the Stratasys F900® 3D Printer with the Fortus FDC™ filament drying cabinet. By continuously maintaining filament in the appropriate condition before it enters the printer, the system helps reduce moisture-related printing issues and supports more reliable production.

This combination enables Siemens Mobility to take advantage of ULTEM™ 9085 resin for demanding railway applications while supporting longer production runs, consistent part quality and reduced operator intervention.

F900® 3D Printing with the Fortus FDC™

Siemens Mobility integrated the Fortus FDC™ (filament dryer and delivery cabinet) into its F900® production setup to improve efficiency and consistency. The FDC holds significantly more filament than the standard on-board canister, extending runtime and reducing interruptions on long, large-format builds.

The Fortus FDC uses controlled heat and dry air circulation to reduce filament moisture content before it feeds into the printer. This continuous drying eliminates defects tied to moisture without requiring separate pre-drying steps or added operator effort.

3D printed railway headlight housing using a FDM F900 3D Printer.
© Siemens Mobility GmbH, Client: Rhein-Neckar-Verkehr GmbH.

Benefits of Siemens Mobility's Additive Manufacturing Workflow

Integrating the Fortus FDC™ into the Easy Sparovation Part® production workflow delivered improvements across the key metrics that matter to Siemens Mobility’s customers:

  • Faster spare-part delivery
    Supports rail fleet modernization and maintenance requirements.
  • Higher machine utilization
    Longer uninterrupted builds improve utilization and the cost position per part.
  • Improved part quality
    Continuous filament drying helps prevent moisture-related printing defects.
  • Reduced operator intervention
    The FDC supports longer F900 production runs with fewer interruptions.

 

 

The FDC is a crucial success factor for increased machine utilization and part quality. It’s enabling us to deliver performance improved additive spare parts that are better than the original spare part, faster and at competitive pricing. Produced locally around the globe in our worldwide printer network at standardized quality levels.”

To download the full case study, click here.