English
English
Case Study

Exploring the Potential of 3D Printing in the Medical Field


Exploring the Potential of 3D Printing in the Medical Field

Italy’s 3D4Med Lab Investigates Benefits for Medical Education and Pre-Surgical

In 2011, 3D4Med began as a research project to explore the potential of 3D printing in the medical field. In the last 10-plus years, the Italy-based, clinical 3D printing laboratory of the polyclinic San Matteo of Pavia, a joint venture with the University of Pavia, has seen significant growth and success in its applications. Today, the lab is devoted to the use of 3D printing technologies for a variety of medical functions, from pre-surgical planning to training in surgical specialties.

alessandro

3D printing gives expert surgeons the opportunity to continue in their training and maintain their skills.

Pediatric Surgery: 3D Printed Models for Simulation and Surgical Planning 

One of the clinicians leveraging 3D printing technology to improve surgical planning is Alessandro Raffaele, a pediatric surgeon at San Matteo Hospital who is working with 3D4Med to develop 3D printed models for simulation and surgical planning for pediatric surgery. 

Pediatric Surgery: 3D Printed Models for Simulation and Surgical Planning
b5244gPhz88jPW1gm7RX9Q

In an event series hosted and organized by Stratasys and 3D4Med called “3D Printing in the Clinical World,” Raffaele described the challenge of preparing for pediatric surgeries, which are performed in smaller anatomical spaces and cavities. 

“We need to develop a model with small structures and with this technology, you can reproduce structures of the body with different materials,” Raffaele said. “3D printed models allow us to train technical skills that are very, very hard to learn on live patients.” 

The three-event series explored how 3D printing can become an integral part of everyday hospital life. Experts from 3D4Med discussed multiple uses for 3D printing, including support for planning surgical and interventional procedures, preoperative training and simulation, informed consent, and training and development of new medical devices.

Professor Pietrabissa

In minimally invasive surgeries that entail a complete loss of tactile feedback, surgeons must rely on vision alone to guide their performance. Practicing these cases with 3D printed models gives clinicians earlier feedback and helps improve planning.

Tactile 3D Printed Models: Understanding Mechanical and Anatomical Information

Professor Andrea Pietrabissa, head of the General Surgery II Unit and Clinical Scientific Advisor for 3D4Med also noted that tactile 3D printed models help clinicians better understand mechanical and anatomical information. 

Tactile 3D Printed Models: Understanding Mechanical and Anatomical Information

“I think the value of 3D printing is the capability to reproduce case-specific challenges,” Pietrabissa said. “The mechanical properties provide excellent force feedback, which is not available with virtual reality.

In minimally invasive surgeries that entail a complete loss of tactile feedback, surgeons must rely on vision alone to guide their performance. Practicing these cases with 3D printed models gives clinicians earlier feedback and helps improve planning.” 

Raffaele also described the learning and training opportunities ahead of complex surgeries for specialists. 

“3D printing gives expert surgeons the opportunity to continue in their training and maintain their skills,” Raffaele said. “One of the big advantages of 3D models is to improve the learning curve. For example, since we have a low case number per year in some malformative pathologies, with 3D models, we can train and perform the same procedure many, many times, so the learning curve improves in a shorter period of time.”

stefania

Our surgeons were impressed by the realism of the anatomical models in terms of morphological reproduction and in terms of mechanical properties.

Stratasys’ Technology and Partnership: Contributing to 3D4Med’s Development

Stefania Marconi, an assistant professor in the Department of Civil Engineering and Architecture at the University of Pavia and coordinator of the 3D4Med lab, noted that Stratasys’ 3D printers for medical applications have been the lab’s first choice for creating accurate, patient-specific models for surgical planning and training.

Stratasys’ Technology and Partnership: Contributing to 3D4Med’s Development

“Our surgeons were impressed by the realism of the anatomical models in terms of morphological reproduction and in terms of mechanical properties,” Marconi said. “The Digital Anatomy Printer has been extremely important for the reproduction of mechanical properties of tissues, and the introduction of the GelMatrix, TissueMatrix, and BoneMatrix materials pave the way to very realistic simulation.”

tissues, and the introduction of the GelMatrixTissueMatrix, and BoneMatrix materials pave the way to very realistic simulation.”

Pietrabissa also noted 3D4Med’s consistent partnership with Stratasys and the contributions that Stratasys technology has made to the lab’s development. 

“We have a strong collaboration built throughout the years with this company, which is very much valuable for us and for our local users,” Pietrabissa said. “The issue of training in surgery has really evolved in the last few years, and new methodologies are raising that range from immersive virtual reality environments through 3D printing itself or cadaveric models.”

Through 3D4Med and the University of Pavia’s research and partnerships, 3D printing technology is providing surgeons and clinicians with more accurate, realistic 3D printed models for pre-surgical planning, training, and device development. The lab is continuing to explore the potential of 3D printing to improve healthcare and patient outcomes.

Related Content

How Companies Use Rapid Protyping

Real-World Innovations with Rapid Prototyping

Discover how real-world companies like yours are using 3D printing for rapid prototyping to stay ahead in today's market.

View more
Medical head baner-webinar advance DAC B

Beyond the Basics: Digital Anatomy Creator Advanced Webinar

Digital Anatomy Creator - a powerful tool that enhances the Digital Anatomy printer possibilities. Join the webinar & start creating custom complex medical models.

View more
Brain medical

Get Started with Digital Anatomy Creator: Creating Medical Models Step-by-Step

Join us to learn how to make the most of the Digital Anatomy Creator, for printing realistic models of human anatomy. Save your spot and register now

View more
How Companies Use Rapid Protyping

Discover how real-world companies like yours are using 3D printing for rapid prototyping to stay ahead in today's market.

Medical head baner-webinar advance DAC B

Digital Anatomy Creator - a powerful tool that enhances the Digital Anatomy printer possibilities. Join the webinar & start creating custom complex medical models.

Brain medical

Join us to learn how to make the most of the Digital Anatomy Creator, for printing realistic models of human anatomy. Save your spot and register now