Description
A large-format industrial FDM® 3D printer featuring a 1-meter heated build chamber, integrated material drying, high-capacity shared consumables with the F3300®, and support for carbon fiber-reinforced Nylon 12CF to produce strong, accurate parts for tooling, manufacturing, and end-use applications.
Material Delivery
Four 4,100 cm3 (250 in3) material spools with automatic material changeover. Shared consumable platform with Stratasys F3300®
Build Size
1,000 x 610 x 610 mm / 372,000 cm3(39.4 x 24 x 24 in. / 22,677 in.3)Maximum length on the diagonal – 1,171 mm (46.1 in.)
Accuracy
XY part accuracy: ± 0.254 mm or ± 0.002 mm/mm (± 0.010 in. or ± 0.002 in./in.), whichever is greater. Z part accuracy: ± 0.200 mm or ± 0.002 mm/mm (± 0.008 in. or ± 0.002 in./in.), whichever is greater, plus one layer height. Accuracy is geometry and material dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield
Description
A large-format industrial FDM® 3D printer featuring a 1-meter heated build chamber, integrated material drying, high-capacity shared consumables with the F3300®, and support for carbon fiber-reinforced Nylon 12CF to produce strong, accurate parts for tooling, manufacturing, and end-use applications.
Material Delivery
3,277 cm3 coil box (200 in.3)
Build Size
1,000 x 610 x 610 mm / 372,000 cm3(39.4 x 24 x 24 in. / 22,677 in.3)Maximum length on the diagonal – 1,171 mm (46.1 in.)
Description
This factory floor ready additive manufacturing system is compatible with a wide selection of materials. With a proven record of repeatability and performance for maximum part-yield and printer uptime, the Fortus 450mc has earned its reputation as a reliable, mid-tier FDM® workhorse.
Material Delivery
Two bays each for model and support canisters. Auto changeover between canisters
Build Size
406 x 355 x 406 mm (16 x 14 x 16 in.)
Network Connectivity
Network Communication 10/100 base T connection. Ethernet protocol. Wired: TCP/IPv6 protocols
System Size and Weight
129.5 x 90.2 x 198.4 cm (51 x 35.5 x 78.1 in.) 601 kg (1325 lbs.)
Operating Conditions
N/A
Power Requirements
208VAC 3 phase, 50/60 Hz, consumes 18 Amps
Regulatory Compliance
CE, cTUVus, RCM, EAC, FCC Part B
Software
All Fortus systems include Insight™ and Control Center™ job processing and management software. Compatible with GrabCAD Print™ and GrabCAD Print Pro™ for use with part processing, job reports, scheduling and remote monitoring. OpenAM software is available through the purchase of an OpenAM License.
Accuracy
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater). Z part accuracy includes an additional tolerance of -0.000/+slice height.
