USA & Canada
USA & Canada

Resources

10 Resource(s) found for
Selective Laser Sintering Prototypes Clear all
10 Resource(s) found
More
More
Article: Super Bowl Shoes Blog
Article: Super Bowl Shoes
August 03, 2020

3D printing plays an unprecedented role in the innovative cleats worn by Super Bowl football players.

From Prototypes to Production Blog
From Prototypes to Production
February 06, 2019

Stratasys Direct's experts and advanced manufacturing solutions will take your design from prototype to final production part.

Innovation in High Power Rocketry Using 3D Printing Blog
Innovation in High Power Rocketry Using 3D Printing
February 06, 2019

Fused Deposition Modeling (FDM) coupled with a higher performance aerospace quality material, we built booster fins, the aft body structure and tailcone for our high power rocket.

The original propeller design, shown above, relied on Fused Deposition Modeling (FDM) 3D printing and Laser Sintering with flexible and filled nylons for functional testing. Blog
Stand Up Paddle Boarding Gets a Boost from 3D Printing
July 31, 2018

This new propeller provides users with improved run times and top speeds thanks to the optimized hydrodynamic design.

737 Scale Model Uses Selective Laser Sintering to Fly Case Study
737 Scale Model Uses Selective Laser Sintering to Fly
June 18, 2018

Created by Area-I in Georgia, PTERA is the unmanned Prototype-Technology Evaluation and Research Aircraft yielding inexpensive flight research for commercial aircraft and NASA, and it’s using 3D printing in a few instrumental ways.

Making Rapid Prototyping Better with 3D Printing Services Blog
Making Rapid Prototyping Better with 3D Printing Services
March 21, 2018

Rapid prototyping with 3D printing gives designers the ability to fail fast, produce multiple design iterations quickly, and change a product design overnight to meet deadlines.

Planning Ahead: The Next Step in the Product Development Life Cycle Blog
Planning Ahead: The Next Step in the Product Development Life Cycle
January 24, 2018

During the planning phase of the product development life cycle, our prototyping services and manufacturing expertise will help you prepare to move into mass production.

Expanding the Range of UAVs with 3D Printing Blog
Expanding the Range of UAVs with 3D Printing
January 23, 2018

With the design freedom allowing for part consolidation and lighter parts, 3D printing has significantly contributed to the development of UAV’s and their latest applications.

SLS Allows 928 Motorsports to Improve Porsche 928 Performance Case Study
SLS Allows 928 Motorsports to Improve Porsche 928 Performance
December 28, 2017

We assisted 928 Motorsports in developing LS intake runners for testing and final production to outperform stock runners in the Porsche 928 engine.

10 of 10 result(s) shown Show more