USA & Canada
USA & Canada

P3 / DLP Materials

17 Material(s) found for
Origin One Clear all
17 Material(s) found
More
LOCTITE® 3D IND403 High Modulus by Henkel
LOCTITE® 3D IND403 High Modulus by Henkel

Tough, high-temperature material. Ideal for molds and end-use parts with up to 80°C operating temperature. Excellent surface finish and dimensional accuracy. Also suitable for interior automotive components and other applications requiring high modulus properties.

LOCTITE® 3D 3172 High Impact by Henkel
LOCTITE® 3D 3172 High Impact by Henkel

Produce functional parts that require high stiffness with a good surface finish and high impact resistance. Attributes are similar to Polypropylene (PP). This material is impact-resistant and is ideal for tooling applications, manufacturing aids, brackets, jigs and fixtures, housings and consumer applications, such as insoles.

Stratasys Open Materials for P3
Stratasys Open Materials for P3

Stratasys open specialty materials unlock a wide range of demanding applications, including molding, casting, high-temperature, ceramic, electrostatic discharge (ESD) and elastic applications.

Somos QuickGen 500 buckle
Somos® QuickGen™ 500

Somos® QuickGen 500 has unique flexibility; it is more flexible than other resins but stiffer than elastomers, offering both flexibility and spring back.

LOCTITE® 3D MED 413 by Henkel
LOCTITE® 3D MED 413 by Henkel

LOCTITE® 3D MED 413 by Henkel is ideal for use in a wide variety medical devices & applications: durable & reusable medical components, orthotics and more.

P3 Stretch IND475
P3 Stretch IND475

Single component industrial strength UV resin that cures to a soft (47A), elastomeric material. Suitable for applications where resilience, snap back, and tear resistance is desired, such as lattice structures and functional prototyping.

Optical sensor housing P3 Deflext 190 ESD
P3™ Deflect™ 190 ESD

A high temperature resistant resin that offers a smooth surface finish. An ideal choice for consumer goods, automotive industry & others. Learn more now.

Ultracur3D® ST45 by BASF
Ultracur3D® ST45 by BASF

Reactive urethane photopolymer for tough applications that require a combination of high strength, long-term toughness and impact resistance.

LOCTITE® 3D IND402 High Rebound by Henkel
LOCTITE® 3D IND402 High Rebound by Henkel

Single component elastomer with high resilience and rebound. Capable of maintaining excellent tensile strength and does not require thermal post-processing. It is comparable to commercial TPUs, with a Shore A hardness of 75. Ideal for lattice structures; e.g., mid-soles and soft inserts.

LOCTITE® 3D 3955 FST by Henkel
LOCTITE® 3D 3955 FST by Henkel

High-performance, high-modulus product with excellent flexural and tensile physical properties and outstanding flame retardance. Suitable for aerospace and transportation components that require flame resistance, high HDT or chemical resistance. Ideal applications include HVAC components, clips and plugs for control systems, connectors, clamps, ducts, brackets.

P3 Deflect™ 120
P3 Deflect™ 120

Our first photopolymer from Evonik is a strong, heat-resistant material that addresses applications where a combination of high-temperature resistance and good elongation at break are crucial. P3 Deflect 120 has low viscosity and high green strength, which make it suitable for parts with challenging geometries such as wiring housings, connectors, or mold tooling.

Anenometer Somos WeatherX 100
Somos® WeatherX™ 100

Somos® WeatherX 100 is an environmentally durable DLP photopolymer that was developed for 3D printing functional end-use parts.

Wave Cylinder P3 Stretch 80
P3™ Stretch™ 80

P3™ Stretch™ 80 is a general-purpose, fast to print elastomer for DLP, an excellent replacement for traditional polyurethane or TPU. Learn more

LOCTITE ® 3D 3843 High Toughness by Henkel
LOCTITE ® 3D 3843 High Toughness by Henkel

A high-strength engineering polymer with good impact resistance and exceptional surface finish. Ideal for a wide variety of tools in the production floor.

Origin Loctite 405 Clear
LOCTITE® 3D IND405 Clear

Clear photopolymer with a smooth surface finish and good impact resistance. Ideal for mechanical guides, fluid ducts, and microfluidic devices.

Stratasys Dura56 by LOCTITE®
Stratasys Dura56 by LOCTITE®

Developed for Origin® 3D printers, Dura56 is a durable, impact-resistant photopolymer with an exceptional surface finish and a low cost per kg. For functional applications where aesthetics and robustness are critical.

LOCTITE® 3D MED 412 by Henkel
LOCTITE® 3D MED 412 by Henkel

MED 412 by Henkel is a medical-grade resin, deal for a range of applications include test swabs, single use medical instruments, lab equipment & more.

17 of 17 result(s) shown Show more