Français
Français
Case Study

Ramping up to half a million 3D printed test swabs


Origin Swabs Printing On a Origin One
3D Print concept

Concept to high-volume production of validated 3D printed medical devices in weeks.

When the COVID-19 pandemic hit, so did an urgent need for large supplies of personal protective equipment (PPE) for healthcare providers and nasopharyngeal swabs for COVID-19 testing. Supply chain disruptions immediately followed, due to complicated supply chains with overwhelmed suppliers and difficult-to-source components. A reliance on a few vendors, instead of multiple supplier sources, and enormous product demand made it difficult for health care providers to secure inventory and layered on additional challenges.

Increased demand and supply chain bottlenecks.

Traditionally manufactured nasopharyngeal swabs have a polyester handle and a tip with tiny rayon or nylon fibers. To test for COVID-19, the swab is inserted through the nose, deep into the nasal cavity, twirled and broken off into a vial to ship to a testing lab.

  • The two major manufacturers of nasopharyngeal swabs produce, assemble, sterilize and package the swabs, using proprietary manufacturing methods and equipment.

  • These companies found themselves unprepared for supply chain disruptions and were unable to scale quickly to meet worldwide demand.

As with other PPE shortages, like face shields, 3D printing emerged as a novel solution with rapid product development and production capabilities that allowed for the design, prototyping, testing and mass production of nasopharyngeal swabs made of medical grade photopolymer materials.

nTopology Lattice Design Software

Rapidly designing and validating a new swab with high efficacy.

Origin (acquired by Stratasys in early 2021) set forth to produce clinically-tested, FDA-registered test swabs at scale. Origin collaborated with Henkel, Harvard’s Beth Israel Deaconess Medical Center (BIDMC), and other 3D printing leaders to develop a one-piece, FDA-compliant, sterile, 3D-printed NP test swab. Origin was able to quickly produce many different designs for clinical evaluation at the same time, in a single build envelope. The resulting swabs are made of a single material, with no injection molding tooling or assembly required. Their lattice design makes sample collection easy and comfortable, with a break point for the sample to be added to the vial and sent to the lab.

Origin NP Swab Individual Package sterile

The Origin team validated the swab’s mechanical capabilities and manufacturability, while Henkel, the material provider, tested the swabs for biocompatibility and validated the complete workflow. The Origin swabs went through phase 3 human clinical trials conducted by Harvard’s Beth Israel Deaconess Medical Center (BIDMC) and were determined to have a high concordance and statistically indistinguishable from the traditional swab.

Anecdotal evidence suggests that the Origin design’s lattice tip can improve specimen collection, due to the low liquid absorption quality of the material and unique design. Longer term, this has the potential to make less accurate diagnostics systems perform better when there is a very low viral load in the patient.

Sterilized Origin One 3D printed nasopharyngeal swabs
Completed Swab Print on Origin One

Production ramp-up.

Origin dedicated its internal capacity of Origin One 3D printers to manufacturing swabs in three shifts a day, seven days a week.

  • Each printer in the lab printed 800 swabs every.

  • Origin shipped over half a million fully validated, packaged and sterilized swabs in just eight weeks.

  • Origin’s swab was shipped and used by healthcare providers and testing centers across the U.S.

Eventually, traditional supply chains ramped up their ability to produce higher numbers of testing swabs, and the demand for the slightly more expensive 3D printed swabs began to drop. Origin was able to slowly decrease production based on real-time demand, while restarting other company initiatives. This is a powerful example of 3D printing’s ability to react to supply chain challenges quickly and efficiently, easily increasing or decreasing production to meet demand. 

Making 3D printing history.

Stratasys Origin One and its Programmable Photopolymerization P3™ technology are an ideal solution for rapid development and production of medical components. Materials from Stratasys’ ecosystem material partner network include medical-grade materials from multiple global chemical companies that can be brought quickly into the Stratasys ecosystem, validated and put into production. In the early stages of the product’s development, Origin surveyed no less than 20 materials, many of which had the ability to pass the biocompatibility requirements, before deciding on LOCTITE MED412 for its unique stiffness and flexibility.

The company was able to ramp up from passing clinical trials to mass production in a matter of days, a far cry from traditional injection molding tooling lead times. Plus, it was possible to easily increase capacity by dedicating additional 3D printers to production. During the same time period, Origin’s customers also produced thousands of units of PPE, respirator components and ventilator components, demonstrating the ability of the technology to be used for various other applications in short supply.

The Stratasys Origin One’s printing technology and access to high-performance materials enable fast iterations and accelerated concept development. This makes it an ideal choice for the rapid development and production of biocompatible components, and it’s what enabled the company to swiftly lend a helping hand during an unprecedented global pandemic. 

Origin One - Triple Straight on

Download the case study

Related Content

Enventys heater holder

Slashing costs, improving performance with Stratasys Origin One.

Learn how Enventys Partners delivers end-use biocompatible devices, while avoiding long lead times and high costs with the Stratasys Origin One.

Voir plus
Footwear being manufactured.

Transforming footwear manufacturing.

Discover ECCO's Manufacturing Breakthrough: Origin One 3D Printer Revolutionizes Footwear Production. Experience precision, speed, and innovation!

Voir plus
Nissan Nismo Origin 3D printed grip

Origin One Steers NISMO Racing Towards Production 3D Printing Solutions

Stratasys Origin One flexible production capability produces end-use parts for Nissan’s Super GT racing team

Voir plus
Enventys heater holder

Learn how Enventys Partners delivers end-use biocompatible devices, while avoiding long lead times and high costs with the Stratasys Origin One.

Footwear being manufactured.

Discover ECCO's Manufacturing Breakthrough: Origin One 3D Printer Revolutionizes Footwear Production. Experience precision, speed, and innovation!

Nissan Nismo Origin 3D printed grip

Stratasys Origin One flexible production capability produces end-use parts for Nissan’s Super GT racing team