Latin-America (Español)
Latin-America (Español)
medical education simulators 3d printing

New white paper: 3D printing for medical education and training.

aaron pearson
Aaron Pearson March 25, 2020
March 25, 2020

The use of 3D printed anatomical replicas for medical education and training is steadily increasing, driven by a desire to find alternatives to expensive, hard-to-get cadavers; animal models that don’t include pathology; or mannequins that don’t represent the full range of clinical complexity.

3D printed static biomodels, instrumental for communicating anatomical structures, and physical simulators, which are used to practice medical procedures, may be valuable tools to address the training difficulties - but the benefits must be better understood. One thing that has been lacking until now is the comprehensive analysis of investigative works, trials and studies related to the education of students, residents and practitioners.

To download your complimentary copy of this important white paper, please click here

To provide an in-depth understanding of 3D printing’s advantages and efficacy, Stratasys has researched the current state of published science on the use of 3D printing as a tool for the advancement, acceleration and improvement of medical training. Working with an independent third party, Stratasys identified recent medical literature citing the use of 3D printing in education and training. The approaches, results and findings were then summarized in a Stratasys White Paper: “ENHANCING CLINICAL PREPAREDNESS - REVIEW OF PUBLISHED LITERATURE ON 3D PRINTING APPLICATIONS FOR MEDICAL EDUCATION AND TRAINING.”

Register for a free webinar to learn how doctors at the Jacobs Institute are using 3D printed vascular models for education and training

A total of 31 scientific papers were analyzed. In these papers, anatomical replicas created via 3D printing were used as adjuncts or alternatives to traditional medical education tools. These 3D printed tools were used across nine specialties and in general medical training, and evaluated accordingly.

Click here to stay on top of 3D printing innovation in healthcare

White Paper Excerpt:

“All studies report 3D printing to be a cost-effective solution. Based on the expense of the 3D printed replicas, excluding capital outlay and ongoing operational costs, the studies state that the technology is more affordable than all other physical models. Adams et al. report a 90% to 95% cost reduction versus plastinated models, and McMenamin et al. show that a $14,000 plastinated model can be replaced by a $350 3D printed replica. The studies report 3D printing costs, based on material consumption, ranging from $10 to $2,600.”

Follow us on the Stratasys Medical LinkedIn Showcase page