Gosiger is a leading machine tool distributor and manufacturing systems provider, building best-in-class solutions for leading machine tools and accessories. The company provides access to hundreds of qualified technicians and engineers with systems and controls to meet the spectrum of manufacturing and automation needs, including installation, training, maintenance, replacement parts, and technical support.
During the machining process in a two-turret lathe, two halves of a finished hose clamp are cut off from the raw material bar. Without a way to capture these parts, the two halves would drop to the machine’s floor and be carried out of the chip conveyor. A traditional solution involved the creation of an expensive and geometrically limiting parts catcher secured to the machine body. However, this would limit the travel of the lower turret, restrict its functionality and negate its intended purpose of increasing machine efficiency.
F123 Series FDM 3D printers give designers, engineers and educators access to affordable, industrial-grade 3D printing. Work faster through concept iterations and component verification.
Make jigs, fixtures and manufacturing tools faster, with strong, stiff materials. Increase productivity and reach your goals sooner with repeatable results.
Learn more about the F370 composite 3D printer.
A nylon carbon fibre filament. The base polymer is filled 10% by weight with chopped carbon, which produces a composite material 67% stronger and 190% stiffer than the nylon base material. FDM Nylon-CF10 is also possesses good chemical resistance, toughness and abrasion resistance.
Download the complete use case to see how Gosiger overcame this challenge, leveraging Stratasys' composite ready 3D printers and material.
