Become More Agile
The Fortus 360mc 3D production system comes in two configurations: the basic system, which builds parts as large as 355 x 254 x 254 mm (14 x 10 x 10 in.), or an optionally upgraded system that builds parts as large as 406 x 355 x 406 mm (16 x 14 x 16 in.) and features two material bays for maximum uninterrupted production. With four layer thicknesses to choose from, you can fine-tune your desired balance between FDM’s finest possible feature detail and the fastest build. Fortus 360mc throughput is 70 percent higher than on the Fortus 250mc, so you can further compress your design cycle, work iteratively and increase production.
Materials
The Fortus 360mc builds parts in three production-grade engineering thermoplastics:
- ABS-M30 for great tensile, impact and flexural strength and environmental stability
- PC for superior mechanical properties and heat resistance
- PC-ABS for the highest impact strength, plus the mechanical properties and heat resistance of PC and the surface appeal of ABS
More Stratasys Production Series Systems
Fortus 360mc Product Specs
Materials:
Build envelope options:
355 x 254 x 254 mm (14 x 10 x 10 in.)
406 x 355 x 406 mm (16 x 14 x 16 in.)
Material delivery options:
- One bay each for material and support canisters
- Two bays each for material and support canisters (with larger build envelope)
Layer thicknesses:
- 0.330 mm (0.013 in.)
- 0.254 mm (0.010 in.)
- 0.178 mm (0.007 in.)
- 0.127 mm (0.005 in.)
Support structure:
Soluble or break-away for PC; soluble for ABS-M30 and PC-ABS
System size/weight:
1281 x 896 x 1962 mm (50.5 x 35.5 x 77.3 in.)/with crate: 786 kg (1,511 lbs.), without crate: 593 kg (1,309 lbs.)
Achievable accuracy:
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)
Network communication:
10/100 base T connection; Ethernet protocol
Power requirements:
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Regulatory compliance:
CE
Special facility requirements:
None
Insight Software
Insight software prepares your CAD program’s STL output to be manufactured on a Fortus system by automatically slicing and generating support structures and material extrusion paths. For maximum control, users can manually edit parameters that determine the look, strength and precision of parts as well as the speed and material use of the FDM process.
With Insight, you can:
- Optimize build orientation for maximum strength and smoothest surface finish
- Customize supports for fast, easy removal and best use of materials
- Program pauses into the build for any reason, such as to embed hardware or circuitry
- Manipulate tool paths for advanced control over part properties
Included with Insight is Control Center. This sophisticated software application communicates with user workstations and Fortus systems, to manage jobs and monitor production status. Design, engineering and manufacturing teams can network and share 3D manufacturing capacity to maximize efficiency and throughput.