Fortus 250mc 3D production system on table

Fortus 250mc

Durability and detail with maximum control

Fortus 250mc pairs fine layer resolution with a larger build envelope and gives you the power to fine-tune every aspect of prototype production. Imagine faster, more effective product testing and development, all in an easy-to-use, office-friendly system.

Stop Outsourcing and Start Building

Two gas caps with metal washer inserts embedded

The Fortus 250mc works with the same powerful Insight software as our Performance 3D Production Systems. Insight software gives you the power to optimize every part for strength, print time or aesthetics. You can specify tool paths, adjust material density, fine-tune part orientation and choose from three available layer resolutions. Best of all, the 250mc’s ABSplus parts are accurate, stable, durable and repeatable.

Image Gallery

Fortus 250mc on Stand

The Fortus 250mc 3D Production System on optional cabinet

Share This Image

Fortus 250mc on Stand

Fortus 250mc on Table

The 250mc gives you Fortus power in an office-friendly size.

Share This Image

Fortus 250mc on Table

Fortus 250mc on Table

The 250mc gives you Fortus power in an office-friendly size.

Share This Image

Fortus 250mc on Table

Fortus 250mc on Stand

The Fortus 250mc 3D Production System on optional cabinet

Share This Image

Fortus 250mc on Stand

3D Printed Planetary Gears

ABSplus 3D prints durable models in nine colors.

Share This Image

3D Printed Planetary Gears

ABSplus Tarp Clip

ABSplus delivers performance on par with production parts.

Share This Image

ABSplus Tarp Clip

Complex Threaded Jar in Red

FDM lets you build durable, complex prototypes in-house.

Share This Image

Complex Threaded Jar in Red

Computer Mouse Prototype

In-house 3D printing lets you test design ideas early.

Share This Image

Computer Mouse Prototype

Fortus Prototype With Inserts

Fortus software allows embedding metal inserts during printing.

Share This Image

Fortus Prototype With Inserts

Fortus Prototype With Inserts

Fortus software allows embedding metal inserts during printing.

Share This Image

Fortus Prototype With Inserts

Complex Threaded Jar in Red

FDM lets you build durable, complex prototypes in-house.

Share This Image

Complex Threaded Jar in Red

Materials

The Fortus 250mc builds models in production-grade ABSplus thermoplastic, which offers nine color choices. This lets your prototypes faithfully resemble finished products in look and durability. The Fortus 250mc uses soluble support structures for easy, hands-free removal — even for parts with complex geometry and twisted cavities.

More Stratasys Design Series Systems

Dimension 1200es 3D printer on wheeled metal cabinetDimension 1200es
Durability meets affordability
The Dimension Elite upright 3D printer on wheeled metal cabinetDimension Elite
High resolution, great durability

Fortus 250mc Product Specs

Fortus 250mc on optional wheeled metal cabinet

Material:
ABSplus-P430

Build envelope (XYZ):
254 x 254 x 305 mm (10 x 10 x 12 in.)

Material delivery:
One build material cartridge and one support material cartridge, each 923 cc (56.3 in3)

Layer thicknesses:

  • 0.013 inch (0.330 mm)
  • 0.010 inch (0.254 mm)
  • 0.007 inch (0.178 mm)

Support structure:
Soluble

Available colors:
Ivory, black, blue, dark grey, fluorescent yellow, nectarine, olive green, red, white, and custom colors

System size/weight:
838 x 737 x 1143 mm (33 x 29 x 45 in.)/with crate: 186 kg (409 lbs.), without crate: 148 kg (326 lbs.)

Achievable accuracy:
Parts are produced within an accuracy of ± .241 mm (± .0095 in.). (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)

Network communication:
10/100 base T connection; Ethernet protocol

Operator attendance:
Limited attendance required for job start and stop

Operating environment:
Maximum room temperature of 30 C (86 F)

Relative humidity range:
30 to 70 percent, noncondensing

Power requirements:
110–120 VAC, 60 Hz, minimum 15A dedicated circuit; or 220–240 VAC 50/60 Hz,minimum 7A dedicated circuit.

Regulatory compliance:
CE/ETL

Software:
All Fortus Systems include Insight and Control Center job-processing and management software.

Download Specs

Insight Software

Monitor Displaying CAD rendering of 3D Printed Part

Insight software prepares your CAD program’s STL output for 3D manufacturing on a Fortus machine by automatically slicing and generating support structures and material extrusion paths. For maximum control, users can manually edit parameters that determine the look, strength and precision of parts as well as the speed and material use of the FDM process.

With Insight, you can:

  • Optimize build orientation for maximum strength and smoothest surface finish
  • Customize supports for fast, easy removal and best use of materials
  • Program pauses into the build for any reason, such as to embed hardware or circuitry
  • Manipulate tool paths for advanced control over part properties

Included with Insight is Control Center. This sophisticated software application communicates with user workstations and Fortus systems, to manage jobs and monitor production status. Design, engineering and manufacturing teams can network and share 3D manufacturing capacity to maximize efficiency and throughput.

Smooth FDM Parts Without Labor

Two 3D printed model tires, one smooth and one with layer lines

The Finishing Touch Smoothing Station polishes FDM parts to near injection-molded quality with minimal operator intervention.

Learn more

Share this page