USA & Canada
USA & Canada
H350 gripper
Resource Guide

End of Arm Tooling Application Guide: Accomplish Accuracy and Precision

April 07, 2022

Download Technical Application Guide

EOAT (End of Arm Tooling) is used by manufacturers to manipulate, assemble and transport components.

Typically found at the base of a robotic arm, EOAT acts as the robot's wrist and this requires geometric precision and strong mechanical capabilities.

The following technical application guide demonstrates how the H350™ 3D printer, leveraging SAF™ technology, can produce a common EOAT (a gripper) which maintains exact accuracy and cost-efficiency.

Best practices for printing as well as assembly are highlighted in the guide.